6U CPU board with MPC8260 @200 MHz, SDRAM 128 MB, FLASH 16 MB.
Note: this product is not recommended for new designing, please use the suggested alternative reference VSBC-6872.
The VSBC-6862 is a sophisticated and flexible telecom product from the ACTIS Computer PowerPC product line.
This computer board is based on the MPC8260 from MOTOROLA (PowerQUICC II). This processor is rated up to 280 MIPS @ 200 MHz and includes a very efficient SDRAM controller. One of the key feature of this device is to include a Quad Integrated Communications Controller (QUICC). This QUICC is implemented on several products in the Motorola embedded processor family. It provides an dedicated module containing RISC CPU and DMA channels for handling very efficiently a wide range of communications protocols.
The VSBC-6862 includes 16 MByte of 32-bit Flash. This Flash memory supports a dual bank configuration..
This board is supplied with 128 MByte of SDRAM. To maximize the performance, this memory is directly connected to the processor 64-bit data bus.
A dual-port, VME shared, 1 MByte SRAM for intelligent peripheral baord application.
Two Fast Ethernet 100Base-TX/10Base-T are supplied with auto-negociation support.
The VSBC-6862 supports four independant Serial Communication Controllers with multiprotocol support of RS-232 or RS-422/RS-485/V.35 standards. All ports can receive or transmit serial clock for synchronous operations.
For total flexibility , the VSBC-6862 is supplied with four IP slots, supporting nearly hundreds of VITA-4 compatible modules currently available on the market. These modules allow the user board customization for specific applications. In many cases, he will avoids the needs of expensive VME boards.
Software development can be easily done through the JTAG port with cross development tools. In addition several BSP are available or will be introduced for most popular Real Time OS (Linux, OS-9, OSE, pSOS, VxWorks).
- Motorola MPC8260 processor @ 200 MHz
- Floating Point Unit
- On-chip 32 kbyte cache
- 128 MByte SDRAM
- 16 MByteFLASH
- 1 MByte SRAM dual-port, backed on VME standby supply
- Battery-backed SRAM 32 kByte
- Two Fast Ethernet ports (10BaseT/100BaseTX)
- Four high performance serial ports
- Support for RS-232, and/or
- Two general-purpose serial ports
- Four IP module sockets
- Real Time clock calendar
- VME master/slave interface
- VME Interrupt handler
- VME bus arbiter
- JTAG port for software debugging
- Standard board monitor ECMON loaded for hardware setup and RTOS boot